JanBows menu

Menu
close

JanBows / Miu
Miu
Design
Options
Price

Miu is kind. Kind to her owner. Tempting to draw the bow and shoot

Archery is not just about points and medals. It is also about the feeling of the shot and the joy of the arrow flying. And that is exactly what Miu will conquer you with. A smaller riser with a significantly forward grip and extremely reflexed limbs inspired by short Asian bows, similar to the Ashai bow. The forward grip directly calls for “true instinctive” shooting. Playing with Miu will be great fun.

The bow riser is made of black fiberglass and hard exotic woods such as Shedua, Zebrano, Jatoba, Ipe, Wenge, Maple, Ash, Acacia, Black Walnut and others. The wood is pre-cut into slices and re-glued after sanding. This achieves its higher stiffness, stability and damping ability. Reinforcements made of colored fiberglass and effect pearl casts made of epoxy expand the possibilities of configuring your bow even more individually. Before painting the wood of the bow riser is surface stabilized with epoxy and then the entire bow is painted with several layers of matte 2k PUR varnish.

The limbs are made of a weakened core made of bamboo or other light woods and various types of laminates. The thickness of the limb core is individually calculated for each bow with regard to the required weight of the bow. The belly of the bow can be black or decorated with wooden veneer.

SCX (Single cross carbon) has carbon on the back and fiberglass on the belly.

DCX (Double cross carbon) has both laminates made of 100% carbon.

Each Miu comes with a glued velvet rest, Dynaflight 97 or Spectra 652 string, Angel Majesty center serving and wool silencers.

Miu bows are made in these lengths:

  • 60″ for max. draw length 27″ Recommended brace height is 7,25″ to 7,75″
  • 62″ for max. draw length 29″ Recommended brace height is 7,50″ to 8,00″
  • 64″ for max. draw length 29″ Recommended brace height is 7,25″ to 7,75″
  • 66″ for max. draw length 31″ Recommended brace height is 7,50″ to 8,00″

Miu fulfills all requirements for competitions in longbow class under WA and HDHIAA associations.

Heavy riser of the bow
45
Surcharge on the base price

To increase the weight and strength of the bow's riser, the proportion of fiberglass in the front section of the riser can be increased.

Individual high grip
45
Surcharge on the base price

For shooters who prefer a very high grip, a custom grip can be created. This cannot be combined with a leather grip cover.

Engraved pressure point on the grip
35
Surcharge on the base price

Highlighting the pressure point on the bow grip to make it easier to position your hand consistently. The grip’s volume remains unchanged, and the wood’s natural beauty is preserved.

Leather grip cover
45
Surcharge on the base price

The bow grip can be covered with leather approximately one millimeter thick upon the customer’s request. The leather adds bulk to the grip, which must be taken into account during the shaping process. The leather is available in brown and black.

X carbon overlay and limb tips
65
Surcharge on the base price

At the customer's request, the bow can be fitted with carbon overlay reinforcements and carbon tips on the limbs. The cross-weave carbon pattern gives the bow a more technical look.

Carbonwood limb tips
35
Surcharge on the base price

To make the tips of the bow’s limbs even lighter, the fiberglass reinforcement has been replaced with lighter and stronger carbon fiber. The original beautiful wood has been preserved not only for its appearance, but also to achieve the lowest possible weight.

Inserts for attaching the bow quiver
35
Surcharge on the base price

In order to mount an bow quiver it is possible to insert my custom made brass inserts, with an inner thread UNC 10-24, into the riser of the bow.

Miu SCX / 60″, 62″ / 64″, 66″
1,217
Miu DCX / 60″, 62″ / 64″, 66″
1,478

Heavy riser of the bow

45

Individual high grip

45

Engraved pressure point on the grip

35

Leather grip cover

45

X carbon overlay and limb tips

65

Carbonwood limb tips

35

Inserts for attaching the bow quiver

35
I'm interested in a bow: 
Miu
Please write to me.
I'll get back to you as soon as possible.
Thank you

Newsletters

envelopephone-handsetcrosschevron-down-circle